A Beautiful Housewife

Posts Tagged ‘Plumbing Solutions’

There are a number of plumbing repairs that require immediate attention. Chief among these is a clogged drain. Everyone knows the inconvenience and mess that accompany a sluggish drain. Dealing with a clogged drain is just no fun. However, remedial actions taken at the right time can control the situation.

Blocking of the shower drain is also one such situation. When soap scum, hair etc gets into the drain on daily basis, can completely choke the shower drain. Therefore, clear away all the mess from the drains as soon as possible. Well, the task is not that difficult and you can surely do that by yourself if you have an auger.

Cleaning the drains and unplugging them easily and in virtually no time can be done with the help of an auger. At times, when you don’t have the auger, the steps below will help an individual to unclog them.

First of all, remove the strainer from the drain. For this, all you need is to unscrew the screws that are used to hold the strainer in place. The type of strainer that is has no screws, remove it using the pair of nose pliers.

Next step is to fill the shower drain with a little water. Make use of a plunger and plunge it vigorously. Repeat the steps twice if the clogging is still at its place.

If the clog is very tough and plunger is unable to fix the problem, go for the garden hose. Jam the drain completely using a garden hose. Also, wad the towel into it. Turn on and off the water supply to the drain with high speed. This will hit the clog forcefully.

As a result, the clog slowly dissolves thereby clearing the drains. After the drains are open make sure, you clean the drain thoroughly from in as well as out. At last, place in the strainer and tighten the screws. Turn on the water to the faucet. This will further carry away with it the left over residues.

Situation may occur that all the above methods fail to unclog the drains. In such circumstances an auger is needed. You can call in a talented plumber to look into the matter, if you fail to handle it by yourself.

People looking for expert knowledge of plumbing subjects can rely on articles written by plumbing specialist, author, Art Lambert. For expert information on solar water heater construction (click here) and hot water heater repair (click here), visit eLocalPlumbers.com.

Various types of shower units are available in market. What you choose depends on your need and choice. Here we will talk about features of all the units so that you can have good idea about all of them. Here we will talk about push-on mixer shower unit, bath mixer shower unit, manual mixer shower unit, thermostatic mixer power shower and electric shower.

The hose and spray parts of push-on mixer shower unit can be attached to bath tap whenever you need it. You can also adjust varying temperature in it with the help of taps. This shower unit is not very costly to purchase and can be easily installed. The hose connection can be done easily and can also be removed easily.

In bath mixer shower, the hose and spray combined with a bath mixer tap and the temperature can be adjusted through the bath taps. It is a very cheap option. However, the bath shower mixers also suffer from inconvenient temperature control options.

The hose and spray of a manual mixer shower unit are a part of wall unit and the hot and cold water supplies are connected to a single valve. The temperature and pressure of the water are controlled through either one or a variety of knobs.

Temperature control is quite easy in manual mixer types but as per as the cost is concerned, these unit are more expensive than bath mixer shower units and push-on mixer shower units. The installation of hot and cold water supply pipe is also quite difficult.

Just like manual mixer, in thermostatic mixer also, the hose and spray are part of wall unit and there is a single valve for hot and cold water supplies. Thermostatic mixer has a built-in stabilizer to self-adjust the water temperature. Therefore, there is no problem of temperature adjustment here.

Power shower unit contains a powerful electric pump to change both the water pressure and temperature. You can connect this shower unit if you get water supply from a cold water cistern and a hot water cylinder. In power shower unit, both temperature and pressure can be easily adjusted.

Electric shower units are usually fixed in cold water supply line and there only it heats the water. For adjusting temperature and pressure, a knob is provided in this shower unit. A common problem with this unit is that you can maintain high temperatures only at low pressure and low temperature only at a high pressure. However, models that come with winter/summer setting, solves this problem.

Scott Rodgers is a noted writer who has been providing ample guidance on plumbing works all over the country. His splendid knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from White House Plumbers to Chadds Ford Plumbers .