Posts Tagged ‘Roof System’

The notification of a roof leak calls for the immediate repair work. However, it is very important to apprehend the intensity of the leak before you move ahead with the proceedings. Depending on the age and intensity of the roof leak, you can decide the course of action.

It is always possible to determine the intensity of the leak by studying the level of damage or by locating the source of the leak. When it comes to the determination of the age of a particular roof leak then the things get complicating.

Ground a ladder and climb up to the lower edges of the roof. Take a look at the shingles and see if they are discolored or not. Often, the discoloration occurs due to constant exposure of shingles to sunlight. Furthermore, use a paint scraper to lift the shingles along the edges. Examine the hidden surface of the shingles to check whether it is saturated or not. Presence of water underneath the shingles does not sound good for the structural integrity of the roof. Furthermore, check the strength of the attachment and determine if the shingles have become loose and flexible. Such a scenario points towards recent occurrence of leak.

If the leak is not detected in the area near the gutter then go to the flashing area. Concentrate the examination to the flashing sheet around the dormers such as vents, chimneys, pipes etc. Make way for a thorough examination of the concerned area.

First of all, take a look at the color of the flashing sheet. If the flashing sheath looks discolored and weary then an irregularity is detected. Check whether the flashing area is saturated or not. Presence of moisture means that water took some time to get into the internal structure. Hence, the leak is quite old. A musty odor further favors the old age of the leak.

If you think that the problem is older than the apprehended age, observe the state of the attic or the crawlspace. Detect the presence of water or moisture in the framework of trusses and lumber. If water has crept into the lowest lying layer of the roof architecture then the problem is quite old.

Along with the plywood or OSB layer, check the other segments of the setup as well.

The appearance of a musty odor complemented by traits of an old leak corresponds to the old age of the leak.

Scott Rodgers is a fine expert who has been authoring on roofing contents for a long time now. His superb guidance has given motivation to a host of workers, ranging from Lakeside Roofers (Need one? click here!) to Mira Loma Roofers (Need one? click here!).

A damaged asphalt shingle disturbs the overall integrity of your roof setup and calls for a timely replacement. The leaks and the voids resulting due to these damaged shingles affect the affiliated roofing components as well.

Even a novice with a good supervision over his head and a right blend of required tools and supplies, can make the things work.

To complement the right course course of action, a right blend of tools and supplies would also be needed. Though all the tools are of utmost importance but a pry bar tool would play a key role in the entire project. The pry bar would do the actual task of dissociating the damaged shingle from the rest of the roofing setup. Also, make way for a small-sized wooden bar.

Keep a first-aid in tact to protect yourself against major or minor accidents during the course of the assignment.

Take a ladder and rest it against the wall such that it reaches well to the top of the roof. Once you’re on the roof, attach yourself to a rope which in turn is tied to a ridge. This particular caution would prevent you from a free fall from the roof.

Kick off the actual task by tapping the pry bar under the damaged asphalt shingle in such a way that the business-end of the tool is inserted above the gap between tabs. Keep forcing the tool in until the concerned end of the pry bar centers on the nail of the shingle. Exert some downward force on the other end of the pry bar while the business-end holds the neck of the nail. Thereafter, place a wooden bar in the gap under the partially uprooted nail. This particular alteration renders a fulcrum setup to the task and allows the nail to be easily removed.

Remove all the other nails with the same method and pull out the damaged shingle from the setup. Replace the old asphalt shingle with a new one and nail it down well. Make sure that the new shingle has similar dimensions to the old one. Apply a moderate amount of roofing cement on the nails to bind them well to the shingle.

Apply some cement in the gaps under the shingles tab and finish off the project.

Scott Rodgers is a fine expert who has been authoring on roofing for a long time now. His amazing guidance has given motivation to a number of workers, ranging from Elk Roofers (Need one? click here!) to Long Beach Roofers (Need one? click here!).